CVE-2024-50196: pinctrl: ocelot: fix system hang on level based interrupts

Severity: medium (CVSS 5.5 v3.1)
Exploited in the wild: not listed in CISA KEV
EPSS: 0.2% probability of exploitation in the next 30 days
Public exploit or detection template: none known
Published: 2024-11-08 · updated 2026-06-17
Weakness: CWE-754

Description

In the Linux kernel, the following vulnerability has been resolved: pinctrl: ocelot: fix system hang on level based interrupts The current implementation only calls chained_irq_enter() and chained_irq_exit() if it detects pending interrupts. ``` for (i = 0; i < info->stride; i++) { uregmap_read(info->map, id_reg + 4 * i, &reg); if (!reg) continue; chained_irq_enter(parent_chip, desc); ``` However, in case of GPIO pin configured in level mode and the parent controller configured in edge mode, GPIO interrupt might be lowered by the hardware. In the result, if the interrupt is short enough, the parent interrupt is still pending while the GPIO interrupt is cleared; chained_irq_enter() never gets called and the system hangs trying to service the parent interrupt. Moving chained_irq_enter() and chained_irq_exit() outside the for loop ensures that they are called even when GPIO interrupt is lowered by the hardware. The similar code with chained_irq_enter() / chained_irq_exit() functions wrapping interrupt checking loop may be found in many other drivers: ``` grep -r -A 10 chained_irq_enter drivers/pinctrl ```

Affected products

Linux kernel: before 5.15.169; from 5.16 before 6.1.114; from 6.2 before 6.6.58; from 6.7 before 6.11.5; 6.12-rc1, 6.12-rc2, 6.12-rc3 — fixed in 5.15.169, 6.1.114, 6.11.5, 6.6.58

How to fix

Upgrade to a fixed version: Linux kernel 5.15.169, 6.1.114, 6.11.5, 6.6.58. Check the vendor advisory for mitigations.

References

Get alerted when CVE-2024-50196 or the next vulnerability affects your stack