CVE-2025-39724: serial: 8250: fix panic due to PSLVERR

Severity: medium (CVSS 5.5 v3.1)
Exploited in the wild: not listed in CISA KEV
EPSS: 0.2% probability of exploitation in the next 30 days
Public exploit or detection template: none known
Published: 2025-09-05 · updated 2026-10-19

Description

In the Linux kernel, the following vulnerability has been resolved: serial: 8250: fix panic due to PSLVERR When the PSLVERR_RESP_EN parameter is set to 1, the device generates an error response if an attempt is made to read an empty RBR (Receive Buffer Register) while the FIFO is enabled. In serial8250_do_startup(), calling serial_port_out(port, UART_LCR, UART_LCR_WLEN8) triggers dw8250_check_lcr(), which invokes dw8250_force_idle() and serial8250_clear_and_reinit_fifos(). The latter function enables the FIFO via serial_out(p, UART_FCR, p->fcr). Execution proceeds to the serial_port_in(port, UART_RX). This satisfies the PSLVERR trigger condition. When another CPU (e.g., using printk()) is accessing the UART (UART is busy), the current CPU fails the check (value & ~UART_LCR_SPAR) == (lcr & ~UART_LCR_SPAR) in dw8250_check_lcr(), causing it to enter dw8250_force_idle(). Put serial_port_out(port, UART_LCR, UART_LCR_WLEN8) under the port->lock to fix this issue. Panic backtrace: [ 0.442336] Oops - unknown exception [#1] [ 0.442343] epc : dw8250_serial_in32+0x1e/0x4a [ 0.442351] ra : serial8250_do_startup+0x2c8/0x88e ... [ 0.442416] console_on_rootfs+0x26/0x70

Affected products

Debian Linux: 11.0
Linux kernel: from 3.10.48 before 3.11; from 3.12.24 before 5.4.297; from 5.5 before 5.10.241; from 5.11 before 5.15.190; from 5.16 before 6.1.149; from 6.2 before 6.6.103 — fixed in 3.11, 5.10.241, 5.15.190, 5.4.297, 6.1.149, 6.12.44

How to fix

Upgrade to a fixed version: Linux kernel 3.11, 5.10.241, 5.15.190, 5.4.297. Check the vendor advisory for mitigations.

References

Get alerted when CVE-2025-39724 or the next vulnerability affects your stack