CVE-2026-10679: Divide-by-zero in DesignWare SPI driver reachable from spi_transceive syscall (local DoS)

Severity: medium (CVSS 5.5 v3.1)
Exploited in the wild: not listed in CISA KEV
EPSS: 0.1% probability of exploitation in the next 30 days
Public exploit or detection template: none known
Published: 2026-07-21 · updated 2026-10-24
Weakness: CWE-369

Description

The DesignWare SPI driver (drivers/spi/spi_dw.c) computed the SPI BAUDR clock divider as info->clock_frequency / config->frequency without validating config->frequency. spi_transceive is a Zephyr __syscall and its verify handler (drivers/spi/spi_handlers.c) copies the caller-supplied spi_config from userspace without checking the frequency field, so a userspace thread that has been granted access to a DesignWare SPI device kernel object can pass frequency = 0 and trigger an unsigned integer divide-by-zero in spi_dw_configure(). On Cortex-M Mainline (SCB->CCR.DIV_0_TRP is set in z_arm_fault_init()) and on ARC (a dedicated __ev_div_zero vector) this raises a CPU exception, resulting in a kernel fault and local denial of service. The fix rejects zero frequency and frequencies above clock_frequency / 2 (the DesignWare SSI databook minimum SCKDIV of 2) with -EINVAL. The defect affects all Zephyr releases up to and including v4.4.0; exploitation requires CONFIG_USERSPACE=y and an unprivileged thread already granted SPI driver permission. There is no memory-corruption or information-disclosure impact.

Affected products

zephyrproject zephyr: from 1.8.0 through 4.4.1

References

Get alerted when CVE-2026-10679 or the next vulnerability affects your stack